Comments on: Troubleshooting: It does not take an expert to do it correctly http://blog.bulk-online.com/general/troubleshooting-it-does-not-take-an-expert-to-do-it-correctly.html A weblog for the worldwide powder and bulk solids handling and processing community. Fri, 07 Oct 2011 14:26:35 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Kohout http://blog.bulk-online.com/general/troubleshooting-it-does-not-take-an-expert-to-do-it-correctly.html/comment-page-1#comment-33492 Kohout Sat, 06 Mar 2010 13:57:35 +0000 http://blog.bulk-online.com/?p=573#comment-33492 It could be Where? Good luck in finding Vasek It could be
Where?

Good luck in finding
Vasek

]]> By: Teus Tuinenburg http://blog.bulk-online.com/general/troubleshooting-it-does-not-take-an-expert-to-do-it-correctly.html/comment-page-1#comment-31201 Teus Tuinenburg Mon, 19 Oct 2009 15:18:34 +0000 http://blog.bulk-online.com/?p=573#comment-31201 Dear Ralf, Troubleshooting is fun for a real technician but not for a manager. The naming and blaming starts when after a very short time the cause cannot be found. Counting to ten helps and after 10, clear and logical thinking is the only way to solve the situation. The 5 “W”s, you mention can be a good guideline. However, I found only 3 “W”s What When Why Using the first “W” What are the two missing “W”s? Who? ? Have a nice day Teus Dear Ralf,

Troubleshooting is fun for a real technician but not for a manager.
The naming and blaming starts when after a very short time the cause cannot be found.
Counting to ten helps and after 10, clear and logical thinking is the only way to solve the situation.
The 5 “W”s, you mention can be a good guideline.
However, I found only 3 “W”s
What
When
Why

Using the first “W”
What are the two missing “W”s?
Who?
?

Have a nice day
Teus

]]> By: S.Ganesh http://blog.bulk-online.com/general/troubleshooting-it-does-not-take-an-expert-to-do-it-correctly.html/comment-page-1#comment-31192 S.Ganesh Mon, 19 Oct 2009 04:21:26 +0000 http://blog.bulk-online.com/?p=573#comment-31192 Excellent. I may need to add few words. Trouble free running of an equipment starts at the design stage itself. The following are must for trouble free of any equipment. 1. Good Design 2. Good erection & Commissioning 3. Good Operation 4. Good Maintenance. A good maintenance engineer should have a very basic knowledge about other three fields also, to find out out where the mistake could have happened. Thanks & regards, Excellent. I may need to add few words. Trouble free running of an equipment starts at the design stage itself.
The following are must for trouble free of any equipment.
1. Good Design
2. Good erection & Commissioning
3. Good Operation
4. Good Maintenance.

A good maintenance engineer should have a very basic knowledge about other three fields also, to find out out where the mistake could have happened.

Thanks & regards,

]]>